Forum

Welcome to the official website / forum site for Suzuki Swift Sport Owners Club (SSSOC).

 
Forum Navigation
Forum breadcrumbs - You are here:ForumPost History: Moyz
You need to log in to create posts and topics.

Post History: Moyz

123Last »
The ET42 wheels will poke further out an extra couple off mm, so if the ET45 ones look ok in picture …In: New wheels fitment question
4 days ago
The tyres will fit fine. However, I'm not sure if the wheels may 'poke' out from the …In: New wheels fitment question
5 days ago
Yep, had mine replaced under warranty last year at some point 😁In: Rear fog light full to the brim with water...
1 month ago
There should be 🤷‍♂️ If not, buy one or reuse the old one with some exhaust paste 👍In: Remus exhaust
2 months ago
A good 'cold air' system will be benificial 👍In: Induction kit worth it?
2 months ago
What are you going for next mate?In: Valo's ZC32S from Finland
2 months ago
What are you going for next mate?In: Valo's ZC32S from Finland
2 months ago
Yeah I get it often...just hammer refresh and it works after about 5 go's 👍In: Anybody else been experiencing server problems?
2 months ago
Sorry mate, not yet. Hardly driven the car since my last post 😮 Hows your gearbox feeling now? An …In: Gearbox tightness
2 months ago
You could always get a nice one from Japan? Like a Cusco, Beatrush or Monster Sport one?...In: Black leather Red gear knob Suzuki accessory
2 months ago
7.5J ET42 on a 17 inch wheel is about as wide and as low an offset you can go. You can run wider …In: CHANGING OFFSET (ET) ON WHEELS.
3 months ago
Put the front end on axle stands, that should give you plenty room to work with 👍In: Rdx front splitter
4 months ago
A custom place can fit a smaller resonator, but you may get a bit of drone at certain rev ranges.In: Exhaust
4 months ago
Good stuff 👍 Welcome to the clubIn: Zc32s new face
5 months ago
Yeah, its like in between your knees, drivers side under the steering wheel 👍In: OBD2 Port Location SSS33
5 months ago
Good choice on the colour...😁In: Aussie Zc33s
5 months ago
Welcome to the club mate 👍In: Aussie Zc33s
5 months ago
I love the sound of mine. It does drone a tad around 2-2.5k, but its a price I'm willing to pay …In: Cons of a new exhaust?
5 months ago
Sounds and looks great mate 👍 Same design as the CTC one I have...straight through centre section …In: Cons of a new exhaust?
5 months ago
Can you not disable it in the dashboard options? Thats where it is on the ZC33S...just a thought 🤷‍♂ …In: Zc32s unlock beep
5 months ago
We definitely talking about the Sport version with the 6 speed manual?...if so, the gearbox should o …In: Gearbox tightness
5 months ago
Mate, your gearbox should only hold 1.8 litres of fluid 😮In: Gearbox tightness
5 months ago
Keep pressure to the left when switching from 1st to 2nd and 3rd to 2nd. Seems to help. I'll be …In: Gearbox tightness
5 months ago
The centre bore is 60.1mm, the width is 6.5" and I'm sure the offset was ET50 👍In: Technical Oem Wheel info?
6 months ago
Mines is pretty tight on cold mornings to be honest, but the 33's gearbox is pretty notchy anyw …In: Gearbox tightness
6 months ago
Having driven other cars with and without an LSD back to back, they make a huge improvement on handl …In: LSD
6 months ago
Here's a pic I managed to find 👍In: Zc32s wheels
6 months ago
Dunno, but I've got a set for sale. Have a look in the for sale section if you're tempted …In: Zc32s wheels
6 months ago
Couple of newer pics for you guys 😁In: Moyz's ZC33S
6 months ago
Remappers just latch onto the pins on the ecu now, no need to crack it open 👍In: HKS Flash Editor for ZC33S
6 months ago
The radar is bolted onto the slam panel section so taking the bumper off doesnt move it at all 👍In: Horn
6 months ago
4 bolts up top under the bonnet, 2 screws in the wings and about 6(?) screws under the bumper. Just …In: Horn
6 months ago
Bumper takes 2 minutes to take off, really easy 👍In: Horn
6 months ago
Yep, I've been called Noddy at work 🤣In: Horn
6 months ago
I'd be interested too. My workmate said to me "your car sounded awesome there...untill you …In: Horn
7 months ago
Christ I've been a moron...for some reason I though the light at the top of the rear window was …In: Reversing lights
7 months ago
How the hell did you get into those two screws mate? 🤣 Tiny ratchet with a phillips bit on it?...In: Reversing lights
7 months ago
Nice one mate, cheers 👍In: Reversing lights
7 months ago
Here you go mate... https://www.ctc-performance.co.uk/store/hardrace-swift-sport-2012-zc32-rear-e …In: clunk when rocking car back and forth
7 months ago
I had a quick look, there seems to be two screws hidden away on the underside of the bulb cover so I …In: Reversing lights
7 months ago
Quote from Lewis Walsh on September 24, 2020, 11:05 amI've had these in my 33S for months now, …In: Reversing lights
7 months ago
The Teins will be a good choice. Also a rear ARB is meant to help alot too, and if you're wanti …In: Suspension mods
7 months ago
I'm running -30mm H&R springs and it handles like a go-kart mate 👍 I wouldnt go any lowe …In: Suspension mods
7 months ago
Thats a bargain for a battery 👍In: Plugging into cigarette lighter
7 months ago
Thats what you want 👍In: Plugging into cigarette lighter
7 months ago
Check your alternator...if thats knackered, you'll just have wasted 80 quid on a battery for no …In: Plugging into cigarette lighter
7 months ago
Well, good luck to you sir 👍In: Clunking when turning left at speed
7 months ago
If you have access to a multimeter, check the alternator 👍In: Plugging into cigarette lighter
7 months ago
Quote from Kenji Tak on September 11, 2020, 12:02 pmOh and P.S If there was boost leak or bad …In: Bad Fuel Economy
7 months ago
Have all the engine mounts been checked? All the lower bushings? Honestly sounds like a bush has gon …In: Clunking when turning left at speed
7 months ago
123Last »