Forum

Welcome to the official website / forum site for Suzuki Swift Sport Owners Club (SSSOC).

 
Forum Navigation
Forum breadcrumbs - You are here:ForumGeneral Discussion: General1.0 bodykit?
You need to log in to create posts and topics.

1.0 bodykit?

Cassian Alwrite
Cassian Alwrite@cassian
2 Posts
#1 · June 14, 2024, 7:19 pm

I recently bought a 2017 swift 1.0 boosterjet.

I was wondering if anyone could help?

Id like to fit a 2020 sss front bumper on my car and was wandering if anyone knew if the measurements would match up

Below I will attach a picture of the bumper I would like to fit.

Thanks.

Uploaded files:
  • IMG_7259.jpeg
Click for thumbs down.0Click for thumbs up.0
Mark Staniland
Skomaz@skomaz
127 Posts
#2 · June 17, 2024, 12:30 pm

Afternoon - I have a 1.0 Boosterjet Hybrid too and parked up next to a Sport today. I therefore had a close look at the front end for you - and as far as I can tell the wing shape / bodywork joints and bonnet lines all match between both cars. I'd therefore hazard a guess that it will fit.

However, another means of checking would be to check the part numbers for the wings and bonnet for both Boosterjet and Sport to see if they are the same. If so then that would reinforce the above.

Click for thumbs down.0Click for thumbs up.0
Mark Staniland
Skomaz@skomaz
127 Posts
#3 · June 17, 2024, 12:35 pm

Just checked - according to Autodoc the wings are the same part number for both Sport and non-Sport...

Click for thumbs down.0Click for thumbs up.0
Cassian Alwrite
Cassian Alwrite@cassian
2 PostsTopic Author
#4 · June 17, 2024, 1:27 pm

Thank you for that. So i will assume it can be fitted.

Whats a sensible quote do you recon i would get for fitting side skirt rear diffuser and a front bumper

Click for thumbs down.0Click for thumbs up.0
Last edited on June 17, 2024, 1:33 pm by Cassian Alwrite