Quote from Liam Gray on February 10, 2019, 7:05 am

Have you sort this now?

If not its really simple to remove all of said above. The trim around the gater just grab it at the back of 4th and pull up (just held by clips) once that's up you unscrew the gear knob and pull the gater up.

I will add pictures later for others to see

Quote from Aiden Dent on February 12, 2019, 10:07 am

As mentioned above really. The trim around the cater just unclips off by pulling on the circled bit. The gear knob will just unscrew and the gator has a plastic ring around it if I remember right just to keep its shape. I know it's been a while since you posted but hope this helps if you haven't already sorted it!

Quote from Uruk Hai on February 13, 2019, 8:56 pm

Thanks for the replies, I haven't tried to remove it yet but I will when I get chance.

I take it the gear knob just unscrews anti clockwise?

Quote from Liam Gray on February 18, 2019, 12:55 pm

Yeah thats right, just watch the spring underneath for the reverse selector

Quote from Marc Roberts on May 9, 2019, 9:24 am

Just seen this thread. Info may come In handy In the near future ?

Quote from ChEd1980 on May 9, 2019, 9:49 am

I need to change my gaiter at some point as I noticed that it has worn through on one side where it has got caught between the stick itself and the trim in the car.

Nice to know that its not going to require half the dash to come out which is what I thought might need to be done!

Quote from Uruk Hai on May 12, 2019, 4:20 pm

I have unscrewed the knob and mine wasn't very tight, just get a good grip and twist anti clockwise!